Filtrar:
DIN
DIN EN 15502-2-1:2024-08
Anulada
2025-07-01
Gas-fired central heating boilers - Part 2-1: Specific standard for type
C appliances and type B2, B3 and B5 appliances of a nominal heat input
not exceeding 1000 kW; German version EN 15502-2-1:2022+A1:2023 / Note:
This standard is part of the DVGW body of rules.*Applies in conjunction
with DIN EN 15502-1 (2022-02).
DIN
DIN EN 3475-805:2023-05
Anulada
2025-07-01
Aerospace series - Cables, electrical, aircraft use - Test methods -
Part 805: Characteristic impedance; English version prEN 3475-805:2023 /
Note: Date of issue 2023-04-21
DIN
DIN EN 16511:2023-07
Anulada
2025-07-01
Modular mechanical locked floor coverings (MMF) - Specification,
requirements and test method for multilayer modular panels for floating
installation; German version EN 16511:2023
DIN
DIN EN ISO 9351:2023-11
Anulada
2025-07-01
Galvanic anodes for cathodic protection in seawater and saline sediments
(ISO/DIS 9351:2023); German and English version prEN ISO 9351:2023 /
Note: Date of issue 2023-10-13
DIN
DIN 65108:2014-12
Anulada
2025-07-01
Aerospace - Flat-conductor cable, unshielded, 300 V, 200 °C; Inactive
for new design
DIN
DIN CEN/TS 15480-3:2014-06;DIN SPEC 91130-3:2014-06
Anulada
2025-07-01
Identification card systems - European Citizen Card - Part 3: European
Citizen Card Interoperability using an application interface; English
version CEN/TS 15480-3:2014
DIN
DIN EN 17240:2024-02
Anulada
2025-07-01
Intelligent transport systems - ESafety - ECall end to end conformance
testing for IMS packet switched based systems; German and English
version prEN 17240:2023 / Note: Date of issue 2024-01-19
DIN
DIN 45635-60:1989-10
Anulada
2025-07-01
Measurement of airborne noise emitted by machines; enveloping surface
method; still picture and motion-picture projectors
DIN
DIN ISO 9211-3:2025-02
Anulada
2025-07-01
Optics and photonics - Optical coatings - Part 3: Environmental
durability (ISO 9211-3:2024); Text in German and English / Note: Date of
issue 2025-01-10
DIN
DIN 51614:2024-12
Anulada
2025-07-01
Testing of liquefied petroleum gases - Detection of ammonia, water and
alkaline solution / Note: Date of issue 2024-11-08
DIN
DIN EN IEC 63267-2-2:2023-07
Anulada
2025-07-01
Fibre optic interconnecting devices and passive components - Fibre optic
connector multimode optical interfaces - Part 2-2: Connection of 50 µm
core diameter multimode physically contacting fibres - Non-angled and
angled for reference connector application, at wavelength of 850 nm
using IEC 60793-2-10 selected A1-OM2b to A1-OM5b fibre only (IEC
86B/4607/CD:2022); Text in German and English / Note: Date of issue 2023-06-30
DIN
DIN 76-1:2016-08
Anulada
2025-07-01
Thread run-outs and thread undercuts - Part 1: For ISO metric threads in
accordance with DIN 13-1
DIN
DIN EN 2002-001:2024-11
Anulada
2025-07-01
Aerospace series - Metallic materials - Test methods - Part 001: Tensile
testing at ambient temperature; English version prEN 2002-001:2024 /
Note: Date of issue 2024-10-04
DIN
DIN 12263:2025-01
Anulada
2025-07-01
Clamps for spherical-ground joints / Note: Date of issue 2024-11-29
DIN
DIN EN 469/A1:2022-02
Anulada
2025-07-01
Protective clothing for firefighters - Performance requirements for
protective clothing for firefighting activities; German and English
version EN 469:2020/prA1:2022 / Note: Date of issue 2022-01-14
DIN
DIN EN ISO 4064-3:2023-12
Anulada
2025-07-01
Water meters for cold potable water and hot water - Part 3: Test report
format (ISO/DIS 4064-3:2023); German and English version prEN ISO
4064-3:2023 / Note: Date of issue 2023-11-10*Applies in conjunction with
DIN EN ISO 4064-1 (2023-12), DIN EN ISO 4064-2 (2023-12).
DIN
DIN EN 14349:2013-02
Anulada
2025-07-01
Chemical disinfectants and antiseptics - Quantitative surface test for
the evaluation of bactericidal activity of chemical disinfectants and
antiseptics used in the veterinary area on non-porous surfaces without
mechanical action - Test method and requirements (phase 2, step 2);
German version EN 14349:2012
DIN
DIN EN IEC 62343-1/A1:2024-01
Anulada
2025-07-01
Dynamic modules - Part 1: Performance standards - General conditions
(IEC 86C/1867/CDV:2023); German and English version EN IEC
62343-1:2019/prA1:2023 / Note: Date of issue 2023-12-15
DIN
DIN EN 1705:1997-01
Anulada
2025-07-01
Plastics piping systems - Thermoplastics valves - Test method for the
integrity of a valve after an external blow; German version EN 1705:1996
DIN
DIN EN 15714-4:2024-07
Anulada
2025-07-01
Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators
for industrial valves - Basic requirements; German and English version
prEN 15714-4:2024 / Note: Date of issue 2024-06-21
DIN
DIN EN 3155-044:2024-02
Anulada
2025-07-01
Aerospace series - Electrical contacts used in elements of connection -
Part 044: Contacts, electrical, male 044, type A, double crimping, class
T - Product standard; English version prEN 3155-044:2023 / Note: Date of
issue 2024-01-05*Applies in conjunction with DIN EN 3155-001 (2023-08).
DIN
DIN ISO 2137:2024-12
Anulada
2025-07-01
Petroleum products and lubricants - Determination of cone penetration of
lubricating greases and petrolatum (ISO 2137:2020); Text in German and
English / Note: Date of issue 2024-10-25
DIN
DIN EN ISO 17831-1:2024-06
Anulada
2025-07-01
Solid biofuels - Determination of mechanical durability of pellets and
briquettes - Part 1: Pellets (ISO/DIS 17831-1:2024); German and English
version prEN ISO 17831-1:2024 / Note: Date of issue 2024-05-24
DIN
DIN 19596-3:2024-11
Anulada
2025-07-01
Manhole tops without vents, classes A 15 and B 125, circular - Part 3:
Covers / Note: Date of issue 2024-10-18
DIN
DIN EN 13684:2018-12
Anulada
2025-07-01
Garden equipment - Pedestrian controlled lawn aerators and scarifiers -
Safety; German version EN 13684:2018
DIN
DIN EN ISO 13402:2001-02
Anulada
2025-07-01
Surgical and dental hand instruments - Determination of resistance
against autoclaving, corrosion and thermal exposure (ISO 13402:1995);
German version EN ISO 13402:2000
DIN
DIN EN 3475-606:2024-09
Anulada
2025-07-01
Aerospace series - Cables, electrical, aircraft use - Test methods -
Part 606: Wicking test on textile braid insulation; German version
ASD-STAN prEN 3475-606:2024 / Note: Date of issue 2024-08-02
DIN
DIN 27201-10:2014-05
Anulada
2025-07-01
State of railway vehicles - Basic principles and production technology -
Part 10: Thermal spraying / Note: DIN 27201-10 (2005-02) remains valid
alongside this standard until 2014-10-31.*A transition period, as set
out in DIN 27201-10 (2025-07), exists until 2025-12-31.
DIN
DIN 45635-26:1979-07
Anulada
2025-07-01
Measurement of airborne noise emitted by machines; enveloping surface
method, hydraulic pumps
DIN
DIN EN 726-1:1995-03
Anulada
2025-07-01
Identification card systems - Telecommunications integrated circuit(s)
cards and terminals - Part 1: systems overview; German version EN 726-1:1994
DIN
DIN EN 12934:1999-12
Anulada
2025-07-01
Feather and down - Composition labelling of precessed feathers and down
for use as sole filling material; German version EN 12934:1999 / Note: A
transition period, as set out in DIN EN 12934 (2025-07), exists until 2026-08-31.
DIN
DIN 59742:2004-07
Anulada
2025-07-01
Circular blanks and rings of wrought nickel and wrought nickel alloys,
hot rolled - Dimensions and tolerances on dimensions and form
DIN
DIN EN 15698-2:2020-04
Anulada
2025-07-01
District heating pipes - Bonded twin pipe systems for directly buried
hot water networks - Part 2: Factory made fitting and valve assemblies
of steel service pipes, polyurethane thermal insulation and one casing
of polyethylene; German version EN 15698-2:2019
DIN
DIN CEN/TS 17240:2019-01;DIN SPEC 4632:2019-01
Anulada
2025-07-01
Intelligent transport systems - ESafety - ECall end to end conformance
testing for IMS packet switched based systems; German version CEN/TS 17240:2018
DIN
DIN EN 13684/A1:2020-07
Anulada
2025-07-01
Garden equipment - Pedestrian controlled lawn aerators and scarifiers -
Safety; German and English version EN 13684:2018/prA1:2020 / Note: Date
of issue 2020-06-12
DIN
DIN
DIN EN 12098-3:2021-09
Anulada
2025-07-01
Energy performance of buildings - Controls for heating systems - Part 3:
Control equipment for electrical heating systems - Modules M3-5,6,7,8;
German and English version prEN 12098-3:2021 / Note: Date of issue 2021-08-13
DIN
DIN EN ISO 11781:2024-01
Anulada
2025-07-01
Molecular biomarker analysis - General guidelines for single-laboratory
validation of qualitative real-time PCR methods (ISO/DIS 11781:2023);
German and English version prEN ISO 11781:2023 / Note: Date of issue 2023-11-24
DIN
DIN EN 12464-2:2014-05
Anulada
2025-07-01
Light and lighting - Lighting of work places - Part 2: Outdoor work
places; German version EN 12464-2:2014
DIN
DIN CEN/TS 15480-4:2012-06;DIN SPEC 91130-4:2012-06
Anulada
2025-07-01
Identification card systems - European Citizen Card - Part 4:
Recommendations for European Citizen Card issuance, operation and use;
English version CEN/TS 15480-4:2012
DIN
DIN EN 1-1:2023-07
Anulada
2025-07-01
Residential liquid fuel burning appliances - Part 1: General
requirements and test methods; German and English version prEN 1-1:2023
/ Note: Date of issue 2023-06-16
DIN
DIN EN 15323:2007-07
Anulada
2025-07-01
Bitumen and bituminous binders - Accelerated long-term
ageing/conditioning by the rotating cylinder method (RCAT); German
version EN 15323:2007
DIN
DIN EN 3773-001:2024-09
Anulada
2025-07-01
Aerospace series - Circuit breakers, single-pole, temperature
compensated, rated currents 1 A to 25 A - Part 001: Technical
specification; German version ASD-STAN prEN 3773-001:2024 / Note: Date
of issue 2024-08-16
DIN
DIN EN 13451-3/A1:2024-03
Anulada
2025-07-01
Swimming pool equipment - Part 3: Additional specific safety
requirements and test methods for inlets and outlets and water/air based
water leisure features installed in pools for public use; German and
English version EN 13451-3:2022/prA1:2024 / Note: Date of issue 2024-02-16
DIN
DIN EN 3155-071:2023-04
Anulada
2025-07-01
Aerospace series - Electrical contacts used in elements of connection -
Part 071: Contacts, electrical, female, type A, crimp, class S - Product
standard; English version prEN 3155-071:2023 / Note: Date of issue 2023-03-24
DIN
DIN 65165-1:2014-12
Anulada
2025-07-01
Aerospace - Cockpit utility lights with adjustable light intensity and
colour change; Inactive for new design
DIN
DIN EN ISO 5114-1:2023-02
Anulada
2025-07-01
Acoustics - Determination of uncertainties associated with sound
emission measures - Part 1: Sound power levels determined from sound
pressure measurements (ISO/DIS 5114-1:2023); German and English version
prEN ISO 5114-1:2023 / Note: Date of issue 2023-01-13
DIN
DIN 14880:2024-07
Anulada
2025-07-01
Boxes for fire equipment - Boxes made of wood, light metal or otherwise
suitable materials / Note: Date of issue 2024-06-07
DIN
DIN 30802-1:2004-12
Anulada
2025-07-01
Technique of transshipment in the transportation chain - Unloading of
bulk freight wagons - Part 1: Interfaces for wagons/unloading equipment
DIN
DIN EN 319532-3:2019-09
Anulada
2025-07-01
Electronic Signatures and Infrastructures (ESI) - Registered Electronic
Mail (REM) Services - Part 3: Formats (Endorsement of the English
version EN 319 532-3 V1.2.1 (2019-04) as a German standard) / Note: DIN
ETS standards collection*Endorsement notice
DIN
DIN 29900-2:2014-12
Anulada
2025-07-01
Aerospace - Electrical cables, single conductor, aluminium, 600 V, 150
°C - Technical specification; Inactive for new design
DIN
DIN EN IEC 62343-1:2020-02
Anulada
2025-07-01
Dynamic modules - Part 1: Performance standards - General conditions
(IEC 62343-1:2019); German version EN IEC 62343-1:2019 / Note: DIN EN
62343-1 (2017-02) remains valid alongside this standard until
2022-03-13.*A transition period, as set out in DIN EN IEC 62343-1
(2025-07), exists until 2027-01-18.
DIN
DIN 30801:2004-12
Anulada
2025-07-01
Technique of transshipment in the transportation chain - Loading of bulk
freight wagons - Interfaces for wagons/loading equipment
DIN
DIN EN ISO 105-C09:2023-02
Anulada
2025-07-01
Textiles - Tests for colour fastness - Part C09: Colour fastness to
domestic and commercial laundering - Oxidative bleach response using a
non-phosphate reference detergent incorporating a low temperature bleach
activator (ISO/DIS 105-C09:2023); German and English version prEN ISO
105-C09:2023 / Note: Date of issue 2023-01-06
DIN
DIN 65430:2024-08
Anulada
2025-07-01
Aerospace series - Sleeve - Wall thickness 0,25 mm, for fasteners with
countersunk head; Text in German and English / Note: Date of issue 2024-07-12
DIN
DIN EN 10333:2005-07
Anulada
2025-07-01
Steel for packaging - Flat steel products intended for use in contact
with foodstuffs, products and beverages for human and animal consumption
- Tin coated steel (tinplate); German version EN 10333:2005
DIN
DIN EN ISO/IEC 29151:2025-02
Anulada
2025-07-01
Information security, cybersecurity and privacy protection - Controls
and guidance for personally identifiable information protection (ISO/IEC
DIS 29151:2024); German and English version prEN ISO/IEC 29151:2024 /
Note: Date of issue 2025-01-10
DIN
DIN EN 6051:2023-05
Anulada
2025-07-01
Aerospace series - Collar, swage locking, shear type, in aluminium alloy
3003, conversion coating - Inch series; English version prEN 6051:2023 /
Note: Date of issue 2023-04-14
DIN
DIN EN 726-2:1996-08
Anulada
2025-07-01
Identification card systems - Telecommunications integrated circuit(s)
cards and terminals - Part 2: Security framework; German version EN 726-2:1995
DIN
DIN EN ISO 4064-2:2017-10
Anulada
2025-07-01
Water meters for cold potable water and hot water - Part 2: Test methods
(ISO 4064-2:2014); German version EN ISO 4064-2:2017 / Note: This
standard is part of the DVGW body of rules.
