Filtrar:
DIN
DIN 2233:2008-07
En Vigor
2008-07-01
Geometrical product specifications (GPS) - Gap gauges "NOT GO"
with forged gauging member over 3 mm up to 100 mm nominal size
DIN
DIN EN ISO 17892-9:2018-07
En Vigor
2018-07-01
Geotechnical investigation and testing - Laboratory testing of soil -
Part 9: Consolidated triaxial compression tests on water saturated soils
(ISO 17892-9:2018); German version EN ISO 17892-9:2018
DIN
DIN EN 300392-12-16:2005-04
En Vigor
2005-04-01
Terrestrial Trunked Radio (TETRA) - Voice plus Data (V+D) - Part 12:
Supplementary services stage 3 - Sub-part 16: Pre-emptive Priority Call
(PPC) (Endorsement of the English version EN 300392-12-16 V1.2.1
(2004-09) as German standard) / Note: DIN ETS standards
collection*Endorsement notice
DIN
DIN EN 1996-1-1:2019-09
En Vigor
2019-09-01
Eurocode 6 - Design of masonry structures - Part 1-1: General rules for
reinforced and unreinforced masonry structures; German and English
version prEN 1996-1-1:2019 / Note: Date of issue 2019-08-16*Intended as
replacement for DIN EN 1996-1-1 (2013-02).*To be amended by DIN EN
1996-1-1/A1 (2026-05).
DIN
DIN EN 16014:2011-10
En Vigor
2011-10-01
Hardware for furniture - Strength and durability of locking mechanisms;
German version EN 16014:2011
DIN
DIN EN 301908-5:2012-07
En Vigor
2012-07-01
IMT cellular networks - Harmonized EN covering the essential
requirements of article 3.2 of the R&TTE Directive - Part 5: CDMA
Multi-Carrier (cdma2000) Base Stations (BS) (Endorsement of the English
version EN 301908-5 V5.2.1 (2011-09) as German standard) / Note: DIN ETS
standards collection*Endorsement notice
DIN
DIN EN 4538-003:2011-02
En Vigor
2011-02-01
Aerospace series - Bearings, spherical plain, in corrosion resisting
steel with self-lubricating liner elevated load under low oscillations -
Narrow series - Dimensions and loads - Part 003: Inch series with low
friction coefficient; German and English version EN 4538-003:2010
DIN
DIN 2083-1:1980-04
En Vigor
1980-04-01
Bearing Sleeves for Milling Machine Arbors, for Milling Cutters with
Longitudinal Keyway
DIN
DIN
DIN 38406-1:1983-05
En Vigor
1983-05-01
German standard methods for the examination of water, waste water and
sludge; cations (group E); determination of iron (E 1)
DIN
DIN EN 14803:2024-12
En Vigor
2024-12-01
Waste management - Identification and/or determination of the quantity
of waste; German version EN 14803:2020+A1:2024
DIN
DIN EN ISO 15996:2017-12
En Vigor
2017-12-01
Gas cylinders - Residual pressure valves - Specification and type
testing of cylinder valves incorporating residual pressure devices (ISO
15996:2017); German version EN ISO 15996:2017
DIN
DIN EN 16482:2024-09
En Vigor
2024-09-01
Founding - Continuous cast iron bars; German version EN 16482:2024
DIN
DIN 5042-6:1979-03
En Vigor
1979-03-01
Gaslamps and lighting fittings; ignition burner, upright structure
DIN
DIN EN 60068-2-61:1993-12
En Vigor
1993-12-01
Environmental testing; part 2: test methods; test Z/ABDM: climatic
sequence (IEC 60068-2-61:1991); German version EN 60068-2-61:1993
DIN
DIN EN ISO 6450:2022-01
En Vigor
2022-01-01
Rubber- or plastics-coated fabrics - Determination of resistance to
liquids (ISO 6450:2021); German version EN ISO 6450:2021
DIN
DIN EN 410:2024-12
En Vigor
2024-12-01
Glass in building - Determination of luminous and solar characteristics
of glazing; German and English version prEN 410:2024 / Note: Date of
issue 2024-11-22*Intended as replacement for DIN EN 410 (2011-04).
DIN
DIN 10519:2025-02
En Vigor
2025-02-01
Food hygiene - Self-service equipment for unpackaged food - Hygiene requirements
DIN
DIN EN ISO 2076:2022-02
En Vigor
2022-02-01
Textiles - Man-made fibres - Generic names (ISO 2076:2021); German
version EN ISO 2076:2021 / Note: To be replaced by DIN EN ISO 2076 (2025-08).
DIN
DIN
DIN
DIN EN 18007-3:2024-09
En Vigor
2024-09-01
Electromagnetic pulse welding - Part 3: Qualification of welding
operators and weld setters; German version EN 18007-3:2024
DIN
DIN EN ISO 13919-1:2020-03
En Vigor
2020-03-01
Electron and laser-beam welded joints - Requirements and recommendations
on quality levels for imperfections - Part 1: Steel, nickel, titanium
and their alloys (ISO 13919-1:2019); German version EN ISO 13919-1:2019
DIN
DIN EN ISO 15112:2023-03
En Vigor
2023-03-01
Natural gas - Energy determination (ISO 15112:2018); German version EN
ISO 15112:2018 / Note: This standard is part of the DVGW body of rules.
DIN
DIN
DIN 58913-1:2000-03
En Vigor
2000-03-01
Haemostaseology - Determination of factor II coagulant activity (F II C)
and factor X coagulant activity (F X C) - Part 1: Reference measurement
procedure for the one-stage method
DIN
DIN EN ISO 15874-3:2022-05
En Vigor
2022-05-01
Plastics piping systems for hot and cold water installations -
Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2013 + Amd 1:2018 +
Amd 2:2021); German and English version EN ISO 15874-3:2013 + A1:2018 +
A2:2021 / Note: This standard is part of the DVGW body of rules.
DIN
DIN 50157-1:2020-11
En Vigor
2020-11-01
Metallic materials - Hardness testing with portable measuring devices
operating with mechanical penetration depth - Part 1: Test method
DIN
DIN 49075-1:2025-01
En Vigor
2025-01-01
Frames and covers for use with switches, socket-outlets and other
accessories intended to be mounted into mounting boxes - Part 1: With
openings having a diameter of 45 mm and with specified inserts - Major
dimensions / Note: Date of issue 2024-12-20*Intended as replacement for
DIN 49075-1 (1989-10).
DIN
DIN EN 18007-2:2024-09
En Vigor
2024-09-01
Electromagnetic pulse welding - Part 2: Design of welded joints; German
version EN 18007-2:2024
DIN
DIN
DIN EN IEC 63138-2:2024-09
En Vigor
2024-09-01
Multi-channel radio-frequency connectors - Part 2: Sectional
specification for MQ4 series circular connectors (IEC 63138-2:2023);
German version EN IEC 63138-2:2023 / Note: DIN EN IEC 63138-2 (2022-05)
remains valid alongside this standard until 2026-11-21.*Applies in
conjunction with DIN EN IEC 63138-1 (2020-08).
DIN
DIN EN ISO 24263:2021-03
En Vigor
2021-03-01
Footwear - Attachment strength of straps, trims and accessories (ISO
24263:2020); German version EN ISO 24263:2020
DIN
DIN 41772 Beiblatt 2:1979-02
En Vigor
1979-02-01
Static power convertors; semiconductor rectifier equipment, examples of
characteristic curves for equipment operating in parallel with batteries
DIN
DIN EN ISO 11666:2018-05
En Vigor
2018-05-01
Non-destructive testing of welds - Ultrasonic testing - Acceptance
levels (ISO 11666:2018); German version EN ISO 11666:2018
DIN
DIN 47600-4:1974-10
En Vigor
1974-10-01
Cast Metal Joint Boxes for Power Cables up to 10 kV; Internal Design for
Paper-insulated Cables
DIN
DIN
DIN EN ISO 18243:2022-07
En Vigor
2022-07-01
Electrically propelled mopeds and motorcycles - Test specifications and
safety requirements for lithium-ion battery systems (ISO 18243:2017 +
Amd 1:2020); German version EN ISO 18243:2019 + A1:2020 / Note: To be
replaced by DIN EN ISO 18243 (2024-10).
DIN
DIN
DIN EN 62439-1:2010-09
En Vigor
2010-09-01
Industrial communication networks - High availability automation
networks - Part 1: General concepts and calculation methods (IEC
62439-1:2010); English version EN 62439-1:2010 / Note: DIN EN 62439
(2009-01) remains valid alongside this standard until 2013-03-01.*A
transition period, as set out in DIN EN 62439-1/A1 (2013-06) and DIN EN
62439-1/A2 (2018-05), exists until 2020-11-10.*To be replaced by DIN EN
62439-100 (2015-03).*To be amended by DIN EN 62439-1/A1 (2011-08).
DIN
DIN 19655:2008-11
En Vigor
2008-11-01
Irrigation - Tasks, fundamental principles, planning and methods
DIN
DIN EN ISO 14273:2016-11
En Vigor
2016-11-01
Resistance welding - Destructive testing of welds - Specimen dimensions
and procedure for tensile shear testing resistance spot and embossed
projection welds (ISO 14273:2016); German version EN ISO 14273:2016
DIN
DIN 72332-2:1983-10
En Vigor
1983-10-01
Battery cable terminals for starter batteries; light soldering terminals
DIN
DIN
DIN EN ISO 15212-2:2002-07
En Vigor
2002-07-01
Oscillation-type density meters - Part 2: Process instruments for
homogeneous liquids (ISO 15212-2:2002); German version EN ISO 15212-2:2002
DIN
DIN 83414-2:2008-08
En Vigor
2008-08-01
Small hatchways for emergency escape, weathertight - Part 2: Coamings /
Note: To be replaced by DIN 83414-2 (2025-11).
DIN
DIN 49860-2:2000-01
En Vigor
2000-01-01
Metal halide lamps with spectral energy distribution similar to natural
light - Part 2: Sports lighting
DIN
DIN EN ISO 5370:2025-01
En Vigor
2025-01-01
Solid biofuels - Determination of fines content in pellets (ISO
5370:2023); German version EN ISO 5370:2023
DIN
DIN 8375 Berichtigung 1:2008-03
En Vigor
2008-03-01
Subland twist drills with Morse taper shank for clearance holes and
countersinks for countersunk head screws, Corrigenda to DIN 8375:2006-11
DIN
DIN
DIN EN 1366-9:2025-04
En Vigor
2025-04-01
Fire resistance tests for service installations - Part 9: Single
compartment smoke extraction ducts; German version EN 1366-9:2024
DIN
DIN EN ISO 18674-5:2020-02
En Vigor
2020-02-01
Geotechnical investigation and testing - Geotechnical monitoring by
field instrumentation - Part 5: Stress change measurements by total
pressure cells (TPC) (ISO 18674-5:2019); German version EN ISO 18674-5:2019
DIN
DIN 18865-9:2021-10
En Vigor
2021-10-01
Equipment for commercial kitchens - Food distribution equipment - Part
9: Equipment-insides in basic and hygiene version - Requirements and
testing / Note: DIN 18865-9 (1997-03) remains valid alongside this
standard until 2022-03-31.
DIN
DIN 14800-20:2021-08
En Vigor
2021-08-01
Fire-fighting equipment for fire-fighting and rescue service vehicles -
Part 20: Window opening tool chest
DIN
DIN
DIN
DIN 6868-162:2022-01
En Vigor
2022-01-01
Image quality assurance in diagnostic X-ray departments - Part 162:
Acceptance test of digital mammography installations
DIN
DIN EN IEC 61158-3-19:2020-06
En Vigor
2020-06-01
Industrial communication networks - Fieldbus specifications - Part 3-19:
Data-link layer service definition - Type 19 elements (IEC
61158-3-19:2019); English version EN IEC 61158-3-19:2019, only on CD-ROM
/ Note: CD-ROM*DIN EN 61158-3-19 (2015-07) remains valid alongside this
standard until 2022-05-29.
DIN
DIN 103-6:1972-10
En Vigor
1972-10-01
ISO Metric Trapezoidal Screw Threads; Limiting Sizes for Nut Threads
from 105 to 300 mm Nominal Diameter
DIN
DIN 14034-6:2024-06
En Vigor
2024-06-01
Graphical symbols for fire brigade - Part 6: Equipments in buildings










