Filtrar:
DIN
DIN 3603:2025-12
En Vigor
2025-12-01
Test methods for cyclic load change internal pressure tests for the
renovation and repair of sewage pressure pipe systems
DIN
DIN EN IEC 63524:2025-12
En Vigor
2025-12-01
Artificial Intelligence enabled Medical Devices - Computer assisted
analysis software for pulmonary images - Algorithm performance test
methods (IEC 62B/1391/CDV:2025); German and English version prEN IEC
63524:2025 / Note: Date of issue 2025-11-21
DIN
DIN EN ISO 21043-4:2024-06
En Vigor
2025-12-01
Forensic Sciences - Part 4: Interpretation (ISO/DIS 21043-4:2024);
German and English version prEN ISO 21043-4:2024 / Note: Date of issue 2024-05-17
DIN
DIN EN 71-14:2019-03
En Vigor
2025-12-01
Safety of toys - Part 14: Trampolines for domestic use; German version
EN 71-14:2018 / Note: Applies in conjunction with DIN EN 71-1 (2018-12).
DIN
DIN EN 14212:2022-11
En Vigor
2025-12-01
Ambient air - Standard method for the measurement of the concentration
of sulfur dioxide by ultraviolet fluorescence; German and English
version prEN 14212:2022 / Note: Date of issue 2022-09-30
DIN
DIN EN ISO 25178-602:2023-11
En Vigor
2025-12-01
Geometrical product specifications (GPS) - Surface texture: Areal - Part
602: Design and characteristics of non-contact (confocal chromatic
probe) instruments (ISO/DIS 25178-602:2023); German and English version
prEN ISO 25178-602:2023 / Note: Date of issue 2023-10-06
DIN
DIN EN 10378:2025-12
En Vigor
2025-12-01
Welded stainless steel square and rectangular tubes for mechanical and
structural engineering and decorative use - Technical delivery
conditions; German version EN 10378:2025
DIN
DIN EN ISO 80369-6:2018-10
En Vigor
2025-12-01
Small bore connectors for liquids and gases in healthcare applications -
Part 6: Connectors for neuraxial applications (ISO 80369-6:2016,
Corrected version 2016-11-15); German version EN ISO 80369-6:2016
DIN
DIN EN ISO/IEC 24970:2025-12
En Vigor
2025-12-01
Artificial intelligence - AI system logging (ISO/IEC DIS 24970:2025);
German and English version prEN ISO/IEC 24970:2025 / Note: Date of issue 2025-10-31
DIN
DIN EN ISO 6143:2025-12
En Vigor
2025-12-01
Gas analysis - Comparison methods for determining and checking the
composition of calibration gas mixtures (ISO 6143:2025); German version
EN ISO 6143:2025
DIN
DIN ISO 362-3:2024-12
En Vigor
2025-12-01
Acoustics - Measurement of noise emitted by accelerating road vehicles -
Engineering method - Part 3: Indoor testing M and N categories (ISO
362-3:2022); Text in German and English / Note: Date of issue 2024-10-25
DIN
DIN EN 13763-17:2004-03
En Vigor
2025-12-01
Explosives for civil uses - Detonators and relays - Part 17:
Determination of no-fire current of electric detonators; German version
EN 13763-17:2003
DIN
DIN EN 17990:2023-09
En Vigor
2025-12-01
Thermal insulation and energy economy in buildings - Method to determine
the durability of bondings with adhesive tapes and adhesive masses for
the establishment of airtight layers under climatic conditions
representative for indoor environments; German and English version prEN
17990:2023 / Note: Date of issue 2023-08-11
DIN
DIN ISO 24495-2:2025-12
En Vigor
2025-12-01
Plain language - Part 2: Legal communication (ISO 24495-2:2025)
DIN
DIN EN 13763-8:2025-12
En Vigor
2025-12-01
Explosives for civil uses - Detonators and detonating cord relays - Part
8: Verification of resistance to vibration of plain and semi-finished
detonators; German version EN 13763-8:2025
DIN
DIN EN 3660-063:2025-12
En Vigor
2025-12-01
Aerospace series - Cable outlet accessories for circular and rectangular
electrical and optical connectors - Part 063: Cable outlet, style K,
straight, for heat shrinkable boot, shielded, sealed, self-locking -
Product standard; German and English version prEN 3660-063:2025 / Note:
Date of issue 2025-11-21*Intended as replacement for DIN EN 3660-063 (2022-09).
DIN
DIN EN 13763-22:2004-03
En Vigor
2025-12-01
Explosives for civil uses - Detonators and relays - Part 22:
Determination of capacitance, insulation resistance and insulation
breakdown of leading wires; German version EN 13763-22:2003
DIN
DIN EN 3646-001:2025-12
En Vigor
2025-12-01
Aerospace series - Connectors, electrical, circular, bayonet coupling,
operating temperature 175 °C or 200 °C continuous - Part 001: Technical
specification; German version ASD-STAN prEN 3646-001:2025 / Note: Date
of issue 2025-11-14*Intended as replacement for DIN EN 3646-001 (2016-03).
DIN
DIN EN 16587:2025-12
En Vigor
2025-12-01
Railway applications - Design for PRM Use - Requirements on obstacle
free routes for infrastructure; German version EN 16587:2025
DIN
DIN 79161-1:2018-05
En Vigor
2025-12-01
Playground inspection - Qualification of playground inspectors - Part 1:
Training and education / Note: DIN 79161-1 (2016-11) remains valid
alongside this standard until 2018-10-31.*A transition period, as set
out in DIN 79161-1 (2025-12), exists until 2026-06-30.
DIN
DIN EN 13630-7:2021-05
En Vigor
2025-12-01
Explosives for civil uses - Detonating cords and safety fuses - Part 7:
Determination of reliability of initiation of detonating cords; German
and English version prEN 13630-7:2021 / Note: Date of issue 2021-04-16
DIN
DIN EN ISO 32543-1:2025-12
En Vigor
2025-12-01
Non-destructive testing - Characteristics of focal spots in industrial
X-ray systems - Part 1: Pinhole camera radiographic method (ISO
32543-1:2024); German version EN ISO 32543-1:2025
DIN
DIN 35911:2024-04
En Vigor
2025-12-01
Automatic electrical controls for installation in drinking water systems
- Requirements for solenoid valves / Note: Date of issue 2024-03-15
DIN
DIN EN 13763-21:2021-05
En Vigor
2025-12-01
Explosives for civil uses - Detonators and detonating cord relays - Part
21: Determination of flash-over voltage of electric detonators; German
and English version prEN 13763-21:2021 / Note: Date of issue 2021-04-23
DIN
DIN EN ISO 25178-602:2025-12
En Vigor
2025-12-01
Geometrical product specifications (GPS) - Surface texture: Areal - Part
602: Design and characteristics of non-contact (confocal chromatic
probe) instruments (ISO 25178-602:2025); German version EN ISO 25178-602:2025
DIN
DIN 6858-201:2024-05
En Vigor
2025-12-01
Calibration and Quantification of the SPECT/CT - Part 201: Calibration
of the SPECT/CT for Lu-177 / Note: Date of issue 2024-03-29
DIN
DIN EN 13763-13:2025-12
En Vigor
2025-12-01
Explosives for civil uses - Detonators and detonating cord relays - Part
13: Verification of the resistance to electrostatic discharge (ESD) of
electric and electronic detonators; German version EN 13763-13:2025
DIN
DIN EN 15383:2025-12
En Vigor
2025-12-01
Plastics piping systems for drainage and sewerage - Glass-reinforced
thermosetting plastics (GRP) based on polyester resin (UP) - Manholes
and inspection chambers; German and English version prEN 15383:2025 /
Note: Date of issue 2025-11-07*Intended as replacement for DIN EN 15383 (2014-02).
DIN
DIN EN IEC 61755-3-2:2025-12
En Vigor
2025-12-01
Fibre optic interconnecting devices and passive components - Connector
optical interfaces - Part 3-2: Connector parameters of dispersion
unshifted single-mode physically contacting fibres - Angled 2,5 mm and
1,25 mm diameter cylindrical full zirconia ferrules (IEC
61755-3-2:2024); German version EN IEC 61755-3-2:2024
DIN
DIN EN ISO 15118-21:2025-12
En Vigor
2025-12-01
Road vehicles - Vehicle to grid communication interface - Part 21:
Common 2nd generation network layer and application layer requirements
conformance test plan (ISO 15118-21:2025); English version EN ISO 15118-21:2025
DIN
DIN EN ISO/IEEE 11073-10701:2025-12
En Vigor
2025-12-01
Health informatics - Device interoperability - Part 10701: Point-of-care
medical device communication - Metric provisioning by participants in a
Service-oriented Device Connectivity (SDC) system (ISO/IEEE
11073-10701:2024); English version EN ISO/IEEE 11073-10701:2025
DIN
DIN EN ISO 4064-5:2025-12
En Vigor
2025-12-01
Water meters for cold potable water and hot water - Part 5: Installation
requirements (ISO 4064-5:2025); German version EN ISO 4064-5:2025 /
Note: This standard is part of the DVGW body of rules.
DIN
DIN EN 13857-1:2003-10
En Vigor
2025-12-01
Explosives for civil uses - Part 1: Terminology; German version EN 13857-1:2003
DIN
DIN EN 13763-11:2004-02
En Vigor
2025-12-01
Explosives for civil uses - Detonators and relays - Part 11:
Determination of resistance to damage by dropping of detonators and
relays; German version EN 13763-11:2003
DIN
DIN EN ISO 7199:2024-12
En Vigor
2025-12-01
Cardiovascular implants and artificial organs - Blood-gas exchangers
(oxygenators) (ISO 7199:2024); German version EN ISO 7199:2024
DIN
DIN EN 13763-20:2004-02
En Vigor
2025-12-01
Explosives for civil uses - Detonators and relays - Part 20:
Determination of total resistance of electric detonators; German version
EN 13763-20:2003
DIN
DIN EN ISO 19085-12/A11:2023-07
En Vigor
2025-12-01
Woodworking machines - Safety - Part 12: Tenoning/profiling machines
(ISO 19085-12:2021); German version EN ISO 19085-12:2021/A11:2023
DIN
DIN 16272:2025-05
En Vigor
2025-12-01
PN 250 and PN 400 valves with shut-off test connection for pressure
gauges / Note: Date of issue 2025-04-11
DIN
DIN EN 13763-23:2021-05
En Vigor
2025-12-01
Explosives for civil uses - Detonators and detonating cord relays - Part
23: Determination of the shock-wave velocity of shock tube; German and
English version prEN 13763-23:2021 / Note: Date of issue 2021-04-23
DIN
DIN EN ISO 22477-5/A100:2025-12
En Vigor
2025-12-01
Geotechnical investigation and testing - Testing of geotechnical
structures - Part 5: Testing of grouted anchors (ISO 22477-5:2018);
German version EN ISO 22477-5:2018; Amendment A100 / Note: Date of issue
2025-11-14*Intended as an amendment to DIN EN ISO 22477-5 (2019-05).
DIN
DIN 79161-2:2024-10
En Vigor
2025-12-01
Playground inspection - Qualification of playground inspectors - Part 2:
Examination and verification of qualification / Note: Date of issue 2024-09-06
DIN
DIN EN ISO/IEEE 11073-10103:2025-12
En Vigor
2025-12-01
Health informatics - Device interoperability - Part 10103: Nomenclature,
implantable device, cardiac (ISO/IEEE 11073-10103:2025); English version
EN ISO/IEEE 11073-10103:2025
DIN
DIN EN ISO 5459:2025-12
En Vigor
2025-12-01
Geometrical product specifications (GPS) - Geometrical tolerancing -
Datums and datum systems (ISO 5459:2024); German version EN ISO 5459:2024
DIN
DIN EN 13857-1:2025-12
En Vigor
2025-12-01
Explosives for civil uses - Part 1: Vocabulary; German version EN 13857-1:2025
DIN
DIN EN ISO 9556:2025-12
En Vigor
2025-12-01
Steel and iron - Determination of total carbon content - Infrared
absorption method after combustion in an induction furnace (ISO
9556:2025); German version EN ISO 9556:2025
DIN
DIN EN 13630-11:2021-05
En Vigor
2025-12-01
Explosives for civil uses - Detonating cords and safety fuses - Part 11:
Determination of velocity of detonation of detonating cords; German and
English version prEN 13630-11:2021 / Note: Date of issue 2021-04-16
DIN
DIN EN ISO 11980:2024-08
En Vigor
2025-12-01
Ophthalmic optics - Contact lenses and contact lens care products -
Guidance for clinical investigations (ISO/DIS 11980:2024); German and
English version prEN ISO 11980:2024 / Note: Date of issue 2024-06-28
DIN
DIN
DIN EN 17353/A1:2024-01
En Vigor
2025-12-01
Protective clothing - Enhanced visibility equipment for medium risk
situations - Test methods and requirements; German and English version
EN 17353:2020/prA1:2024 / Note: Date of issue 2023-11-24
DIN
DIN EN 14885:2025-12
En Vigor
2025-12-01
Chemical disinfectants and antiseptics - Application of European
Standards for chemical disinfectants and antiseptics; German and English
version prEN 14885:2025 / Note: Date of issue 2025-10-31*Intended as
replacement for DIN EN 14885 (2023-07).
DIN
DIN 45687-2:2025-12
En Vigor
2025-12-01
Acoustics - Software for the calculation of sound outdoors - Part 2:
Conformity assessment / Note: Applies in conjunction with DIN 45687-1 (2025-12).
DIN
DIN EN ISO 3170:2025-12
En Vigor
2025-12-01
Hydrocarbon Liquids - Manual Sampling (ISO 3170:2025); German version EN
ISO 3170:2025
DIN
DIN EN ISO 19085-8:2018-05
En Vigor
2025-12-01
Woodworking machines - Safety - Part 8: Belt sanding and calibrating
machines for straight workpieces (ISO 19085-8:2017); German version EN
ISO 19085-8:2018
DIN
DIN 82103:2025-12
En Vigor
2025-12-01
Components for liftig, towing, lashing - Shackle, bow - Stainless steels
/ Note: Date of issue 2025-11-14*Intended as replacement for DIN 82103 (2005-09).
DIN
DIN EN 15960:2025-12
En Vigor
2025-12-01
Inorganic fertilizers - Extraction of total calcium, total magnesium,
total sodium and total sulfur in the forms of sulfates; German and
English version prEN 15960:2025 / Note: Date of issue
2025-11-14*Intended as replacement for DIN EN 15960 (2024-05).
DIN
DIN EN ISO 11125-5:2018-12
En Vigor
2025-12-01
Preparation of steel substrates before application of paints and related
products - Test methods for metallic blast-cleaning abrasives - Part 5:
Determination of percentage defective particles and of microstructure
(ISO 11125-5:2018); German version EN ISO 11125-5:2018
DIN
DIN 12336:2025-12
En Vigor
2025-12-01
Laboratory glassware - Flat bottom evaporating basins / Note: Date of
issue 2025-11-14*Intended as replacement for DIN 12336 (1970-03).
DIN
DIN EN ISO 22359:2025-04
En Vigor
2025-12-01
Security and resilience - Guidelines for hardened protective shelters
(ISO 22359:2024); German and English version prEN ISO 22359:2025 / Note:
Date of issue 2025-03-07
DIN
DIN 55633-3:2025-12
En Vigor
2025-12-01
Paints and varnishes - Corrosion protection of steel structures by
powder coating systems - Part 3: Surveillance and certification
requirements / Note: Date of issue 2025-10-31
DIN
DIN EN ISO 6427:2024-02
En Vigor
2025-12-01
Plastics - Determination of matter extractable by organic solvents
(conventional methods) (ISO/DIS 6427:2024); German and English version
prEN ISO 6427:2024 / Note: Date of issue 2024-01-19
