Filtrar:
DIN
DIN 1193:2025-06
En Vigor
2025-06-01
Steel hammers - Technical specifications / Note: DIN 1193 (2012-02)
remains valid alongside this standard until 2025-11-30.
DIN
DIN
DIN 58911-2:2000-03
En Vigor
2000-03-01
Haemostaseology - Calibration of measurement procedures - Part 2:
Photometric measurement procedures
DIN
DIN 12803-1:2019-12
En Vigor
2019-12-01
Laboratory glassware - Alcoholometry - Part 1: General requirements
DIN
DIN 18873-7:2012-07
En Vigor
2012-07-01
Methods for measuring of the energy use from equipment for commercial
kitchens - Part 7: Multiple deck ovens
DIN
DIN 33897-1:2016-08
En Vigor
2016-08-01
Workplace atmospheres - Routine methods for the determination of the
dustiness of bulk materials - Part 1: Basics
DIN
DIN
DIN
DIN 3535-6:2019-04
En Vigor
2019-04-01
Gaskets for gas supply - Part 6: Gasket material based on fibres,
graphite or polytetrafluoroethylene (PTFE) for gas valves, gas
appliances and gas mains / Note: This standard is part of the DVGW body
of rules.
DIN
DIN 6359-2:1996-12
En Vigor
1996-12-01
Reduction sleeves with 7/24 taper shank for parallel shanks with lateral
driving surface and inclined clamping surface - Part 2: Type B with 7/24
taper shank in accordance with DIN 69871-1
DIN
DIN 18040-1:2010-10
En Vigor
2010-10-01
Construction of accessible buildings - Design principles - Part 1:
Publicly accessible buildings / Note: To be replaced by DIN 18040-1
(2023-02), DIN EN 17210 (2019-06, t).
DIN
DIN 56950-4:2015-12
En Vigor
2015-12-01
Entertainment technology - Machinery installations - Part 4: Safety
requirements for serially manufactured projection screens / Note: DIN
19045-5 (1984-01) remains valid alongside this standard until 2016-05-30.
DIN
DIN 83204:2002-08
En Vigor
2002-08-01
Stairs and guard rails for engine rooms and boiler rooms in seagoing
ships - Fundamental requirements / Note: DIN 83204 (1976-03), VG 85222-1
(1988-01) and VG 85222-2 (1988-01) remain valid alongside this standard
until 2003-01-31.*To be replaced by DIN 83204 (2026-01).
DIN
DIN
DIN 17560-2:2004-02
En Vigor
2004-02-01
Ferrosilicon and Silicon - Part 2: Technical delivery conditions for silicon
DIN
DIN
DIN 13-9:1999-11
En Vigor
1999-11-01
ISO general purpose metric screw threads - Part 9: Nominal sizes for 4
mm fine pitch threads; nominal diameter from 40 mm to 300 mm
DIN
DIN 13-21:2005-08
En Vigor
2005-08-01
ISO general purpose metric screw threads - Part 21: Limits of sizes for
fine pitch threads with the preferred tolerance classes; Nominal
diameter from 1 mm to 24,5 mm
DIN
DIN 28146:2019-05
En Vigor
2019-05-01
Glass-lined steel baffles for agitator vessels - Mounting dimensions
DIN
DIN 18317:2019-09
En Vigor
2019-09-01
German construction contract procedures (VOB) - Part C: General
technical specifications in construction contracts (ATV) - Road
construction - Asphalt surfacings
DIN
DIN 82103:2005-09
En Vigor
2005-09-01
Components for liftig, towing, lashing - Shackle, bow - Stainless steels
/ Note: To be replaced by DIN 82103 (2025-12).
DIN
DIN
DIN 33871-1:2013-12
En Vigor
2013-12-01
Information technology - Office machines, inkjet print heads and inkjet
tanks for inkjet printers - Part 1: Preparation of refilled inkjet print
heads and inkjet tanks for inkjet printers; with CD-ROM / Note: CD-ROM
DIN
DIN 20317:2014-02
En Vigor
2014-02-01
Rock drilling - Round thread connections for percussive drilling
equipment - Dimensions, design
DIN
DIN
DIN
DIN 15141:2019-06
En Vigor
2019-06-01
Transportation chain - Pallets - Four way timber perimeter-base pallets;
1 000 mm × 1 200 mm brewery pallets
DIN
DIN 20018-2:2003-04
En Vigor
2003-04-01
Textile-reinforced hoses - Part 2: Maximal working pressure PN 40
DIN
DIN
DIN 18234-4:2018-05
En Vigor
2018-05-01
Fire safety of large roofs for buildings - Fire exposure from below -
Part 4: List of roof penetrations and roof edges, which fulfil the
requirements of DIN 18234-3 without further provision of evidence /
Note: To be replaced by DIN 18234-4 (2022-12).
DIN
DIN
DIN
DIN 6175:2019-07
En Vigor
2019-07-01
Colour tolerances for automotive coatings - Solid and effect coatings
DIN
DIN 15551-3:2013-12
En Vigor
2013-12-01
Radiation sensitive films - Cellulose nitrate film - Part 3: Terms and
definitions, properties, utilization, storage
DIN
DIN 83227:2002-08
En Vigor
2002-08-01
Stairs on seagoing ships - Steps / Note: To be replaced by DIN 83227 (2026-01).
DIN
DIN 20018-3:2003-04
En Vigor
2003-04-01
Textile-reinforced hoses - Part 3: Maximal working pressure PN 100
DIN
DIN 13500:2018-07
En Vigor
2018-07-01
Box bodies for road ambulances - Requirements and test methods
DIN
DIN
DIN 22109-4:2015-03
En Vigor
2015-03-01
Conveyor belts with textile plies for coalmining - Part 4: Rubber-belts
with two plies for above ground applications - Dimensions, requirements
/ Note: DIN 22109-4 (2000-07) remains valid alongside this standard
until 2015-08-31.
DIN
DIN 58771:2016-07
En Vigor
2016-07-01
Production in optical engineering - Dimensions of connections for
polishing tool adapters
DIN
DIN 14530-22:2019-11
En Vigor
2019-11-01
Fire-fighting vehicles - Part 22: Pump water tanker TLF 3000
DIN
DIN 3512:2002-10
En Vigor
2002-10-01
Stopvalves for domestic water supply - Two-way valves - Vertical bonnet
type PN 10; Straight pattern globe valve; Technical rule of the DVGW /
Note: Applies in conjunction with DIN EN 1213 (1999-12).
DIN
DIN 51418-2:2015-03
En Vigor
2015-03-01
X-ray spectrometry - X-ray emission and X-ray fluorescence analysis
(XRF) - Part 2: Definitions and basic principles for measurements,
calibration and evaluation of results
DIN
DIN
DIN
DIN 19902:2018-03
En Vigor
2018-03-01
Leaching of solids - On-site leaching test for determination of
mobilizable inorganic fractions
DIN
DIN 22109-2:2015-03
En Vigor
2015-03-01
Conveyor belts with textile plies for coalmining - Part 2: Rubber-belts
with two plies for underground applications - Dimensions, requirements /
Note: DIN 22109-2 (2000-07) remains valid alongside this standard until 2015-08-31.
DIN
DIN 2184-1:2015-02
En Vigor
2015-02-01
Taps and cold forming taps - Part 1: Long type; General plan of dimensions
DIN
DIN EN ISO 22636:2021-02
En Vigor
2021-02-01
Adhesives - Adhesives for floor coverings - Requirements for mechanical
and electrical performance (ISO 22636:2020); German version EN ISO 22636:2020
DIN
DIN 17052-2:2018-08
En Vigor
2018-08-01
Heat treatment furnaces - Part 2: Requirements for the uniformity of the
result after heat treatment
DIN
DIN EN ISO 16371-2:2019-04
En Vigor
2019-04-01
Non-destructive testing - Industrial computed radiography with storage
phosphor imaging plates - Part 2: General principles for testing of
metallic materials using X-rays and gamma rays (ISO 16371-2:2017,
Corrected version 2018-05); German version EN ISO 16371-2:2017
DIN
DIN 28601:2000-06
En Vigor
2000-06-01
Ductile iron pipes and fittings - Screwed socket joints - Assembly,
sockets, screw rings, sealing rings and slip rings
DIN
DIN EN ISO 11111-4:2016-12
En Vigor
2016-12-01
Textile machinery - Safety requirements - Part 4: Yarn processing,
cordage and rope manufacturing machinery (ISO 11111-4:2005 + Amd 1:2009
+ Amd 2:2016); German version EN ISO 11111-4:2005 + A1:2009 + A2:2016 /
Note: DIN EN ISO 11111-4 (2009-12) remains valid alongside this standard
until 2016-12-31.*Applies in conjunction with DIN EN ISO 11111-1 (2016-12).
DIN
DIN EN ISO 17636-1:2022-10
En Vigor
2022-10-01
Non destructive testing of welds - Radiographic testing - Part 1: X- and
gamma-ray techniques with film (ISO 17636-1:2022); German version EN ISO 17636-1:2022
DIN
DIN 14924:2015-05
En Vigor
2015-05-01
Hatchet for firefighters with protective cover / Note: DIN 14924
(2003-01) remains valid alongside this standard until 2015-10-31.
DIN
DIN EN ISO 638-1:2022-07
En Vigor
2022-07-01
Paper, board, pulps and cellulosic nanomaterials - Determination of dry
matter content by oven-drying method - Part 1: Materials in solid form
(ISO 638-1:2022); German version EN ISO 638-1:2022
DIN
DIN EN ISO 21029-2:2016-02
En Vigor
2016-02-01
Cryogenic vessels - Transportable vacuum insulated vessels of not more
than 1 000 litres volume - Part 2: Operational requirements (ISO
21029-2:2015); German version EN ISO 21029-2:2015
DIN
DIN EN ISO 2560:2021-12
En Vigor
2021-12-01
Welding consumables - Covered electrodes for manual metal arc welding of
non-alloy and fine grain steels - Classification (ISO 2560:2020); German
version EN ISO 2560:2020
DIN
DIN 77210-1:2018-07
En Vigor
2018-07-01
Cash and value services - Part 1: Requirements / Note: DIN 77200
(2008-05) remains valid alongside this standard until 2019-07-01.
DIN
DIN EN ISO 25239-3:2020-12
En Vigor
2020-12-01
Friction stir welding - Aluminium - Part 3: Qualification of welding
operators (ISO 25239-3:2020); German version EN ISO 25239-3:2020
