Filtrar:
DIN
DIN EN ISO 19712-3:2022-07
En Vigor
2022-07-01
Plastics - Decorative solid surfacing materials - Part 3: Determination
of properties - Solid surface shapes (ISO 19712-3:2022); German version
EN ISO 19712-3:2022
DIN
DIN EN 13108-21:2016-12
En Vigor
2016-12-01
Bituminous mixtures - Material specifications - Part 21: Factory
Production Control; German version EN 13108-21:2016 / Note: DIN EN
13108-21 (2006-07) and DIN EN 13108-21 Berichtigung 1 (2009-05) remain
valid alongside this standard until 2018-03-31.
DIN
DIN EN 17656:2022-12
En Vigor
2022-12-01
Stationary source emissions - Requirements on proficiency testing
schemes for emission measurements; German version EN 17656:2022 / Note:
Applies in conjunction with DIN EN ISO/IEC 17043 (2010-05).
DIN
DIN EN IEC 61189-5-301:2022-08
En Vigor
2022-08-01
Test methods for electrical materials, printed boards and other
interconnection structures and assemblies - Part 5-301: General test
methods for materials and assemblies - Soldering paste using fine solder
particles (IEC 61189-5-301:2021); German version EN IEC 61189-5-301:2021
DIN
DIN 45673-9 Beiblatt 1:2015-08
En Vigor
2015-08-01
Mechanical vibration - Resilient elements used in railway tracks - Part
9: Laboratory test procedures for discrete resilient rail fastening
systems; Supplement 1: Test form, with CD-ROM
DIN
DIN EN ISO 12460-3:2023-12
En Vigor
2023-12-01
Wood-based panels - Determination of formaldehyde release - Part 3: Gas
analysis method (ISO 12460-3:2023); German version EN ISO 12460-3:2023
DIN
DIN EN ISO 19734:2021-09
En Vigor
2021-09-01
Eye and face protection - Guidance on selection, use and maintenance
(ISO 19734:2021); German version EN ISO 19734:2021
DIN
DIN EN ISO 10297:2024-11
En Vigor
2024-11-01
Gas cylinders - Cylinder valves - Specification and type testing (ISO
10297:2024, Corrected version 2024-05); German version EN ISO 10297:2024
DIN
DIN EN ISO 17131:2020-07
En Vigor
2020-07-01
Leather - Identification of leather with microscopy (ISO 17131:2020);
German version EN ISO 17131:2020
DIN
DIN EN ISO 8534:2017-05
En Vigor
2017-05-01
Animal and vegetable fats and oils - Determination of water content -
Karl Fischer method (pyridine free) (ISO 8534:2017); German version EN
ISO 8534:2017
DIN
DIN 6164-1:1980-02
En Vigor
1980-02-01
DIN colour chart; system based on the 2° standard colorimetric observer
DIN
DIN EN ISO 10343:2014-10
En Vigor
2014-10-01
Ophthalmic instruments - Ophthalmometers (ISO 10343:2014); German
version EN ISO 10343:2014
DIN
DIN EN 13385:2025-01
En Vigor
2025-01-01
Transportable gas cylinders - Battery vehicles and multiple-element gas
containers (MEGCs) for compressed and liquefied gases (excluding
acetylene) - Inspection at time of filling; German and English version
prEN 13385:2024 / Note: Date of issue 2024-11-29*Intended as replacement
for DIN EN 13385 (2002-06).
DIN
DIN EN ISO 12957-1:2019-04
En Vigor
2019-04-01
Geosynthetics - Determination of friction characteristics - Part 1:
Direct shear test (ISO 12957-1:2018); German version EN ISO 12957-1:2018
DIN
DIN 9870-2:1972-10
En Vigor
1972-10-01
Terms for Stamping Practice; Production Processes and Tools for Severing
DIN
DIN EN ISO 9073-13:2023-10
En Vigor
2023-10-01
Nonwovens - Test methods - Part 13: Repeated liquid strike-through time
(simulated urine) (ISO 9073-13:2023); German version EN ISO 9073-13:2023
DIN
DIN EN ISO 17662:2026-05
En Vigor
2026-05-01
Welding - Calibration, verification and validation of equipment used for
welding, including ancillary activities (ISO 17662:2025); German version
EN ISO 17662:2025
DIN
DIN EN ISO 23036-1:2021-08
En Vigor
2021-08-01
Microbiology of the food chain - Methods for the detection of Anisakidae
L3 larvae in fish and fishery products - Part 1: UV-press method (ISO
23036-1:2021); German version EN ISO 23036-1:2021
DIN
DIN EN 3475-603:2018-03
En Vigor
2018-03-01
Aerospace series - Cables, electrical, aircraft use - Test methods -
Part 603: Resistance to wet arc tracking; German and English version EN
3475-603:2018 / Note: Applies in conjunction with DIN EN 3475-100
(2011-01).*To be replaced by DIN EN 3475-603 (2024-12).
DIN
DIN EN 13381-1:2020-11
En Vigor
2020-11-01
Test methods for determining the contribution to the fire resistance of
structural members - Part 1: Horizontal protective membranes; German
version EN 13381-1:2020
DIN
DIN/TS 26059-1:2025-12
En Vigor
2025-12-01
Components for overfill protection devices for liquids hazardous to
aquatic environment - Part 1: Requirements for sensors and transmitters
for overfill protection systems and components for overfill protection systems
DIN
DIN 74313-1:2023-09
En Vigor
2023-09-01
Non-soldering compression fittings - Part 1: Reducers type A and B
DIN
DIN 16459:2023-08
En Vigor
2023-08-01
Determination of the fiber volume content of fiber-reinforced plastics
by thermogravimetric analysis (TGA)
DIN
DIN EN ISO 7093-2:2000-11
En Vigor
2000-11-01
Plain washers - Large series - Part 2: Product grade C (ISO
7093-2:2000); German version EN ISO 7093-2:2000
DIN
DIN EN ISO 10081-1:2005-05
En Vigor
2005-05-01
Classification of dense shaped refractory products - Part 1:
Alumina-silica (ISO 10081-1:2003); German version EN ISO 10081-1:2005
DIN
DIN EN 13451-5:2014-10
En Vigor
2014-10-01
Swimming pool equipment - Part 5: Additional specific safety
requirements and test methods for lane lines and dividing line; German
version EN 13451-5:2014 / Note: DIN 7939 (2012-02) and DIN EN 13451-5
(2001-07) remain valid alongside this standard until 2015-02-28.
DIN
DIN 50162:1978-09
En Vigor
1978-09-01
Testing of clad steels; determination of shear strength between cladding
metal and parent metal in shear test
DIN
DIN EN ISO 7491:2001-01
En Vigor
2001-01-01
Dental materials - Determination of colour stability (ISO 7491:2000);
German version EN ISO 7491:2000
DIN
DIN 85003-1:2022-09
En Vigor
2022-09-01
Technical specifications for valves for shipboard use - Part 1: General
DIN
DIN
DIN EN ISO 377:2026-01
En Vigor
2026-01-01
Steel and steel products - Location and preparation of samples and test
pieces for mechanical testing (ISO 377:2017 + Amd 1:2025); German
version EN ISO 377:2017 + A1:2025
DIN
DIN EN ISO 12241:2022-09
En Vigor
2022-09-01
Thermal insulation for building equipment and industrial installations -
Calculation rules (ISO 12241:2022); German version EN ISO 12241:2022
DIN
DIN EN ISO 20558-2:2019-06
En Vigor
2019-06-01
Plastics - Poly(phenylene sulfide) (PPS) moulding and extrusion
materials - Part 2: Preparation of test specimen and determination of
properties (ISO 20558-2:2018); German version EN ISO 20558-2:2019
DIN
DIN EN ISO 14120:2016-05
En Vigor
2016-05-01
Safety of machinery - Guards - General requirements for the design and
construction of fixed and movable guards (ISO 14120:2015); German
version EN ISO 14120:2015
DIN
DIN EN ISO 14268:2023-05
En Vigor
2023-05-01
Leather - Physical and mechanical tests - Determination of water vapour
permeability (ISO 14268:2023); German version EN ISO 14268:2023
DIN
DIN EN 62591 Berichtigung 1:2021-08
En Vigor
2021-08-01
Industrial communication networks - Wireless communication network and
communication profiles - WirelessHART (IEC 62591:2016/COR1:2021);
English version EN 62591:2016/AC:2021-03
DIN
DIN EN ISO 13004:2023-10
En Vigor
2023-10-01
Sterilization of health care products - Radiation - Substantiation of
selected sterilization dose: Method VD<(Index)max><(hoch)SD>
(ISO 13004:2022); German version EN ISO 13004:2023
DIN
DIN EN ISO 54321:2021-04
En Vigor
2021-04-01
Soil, treated biowaste, sludge and waste - Digestion of aqua regia
soluble fractions of elements (ISO 54321:2020); German version EN ISO 54321:2021
DIN
DIN EN 1004-1:2021-02
En Vigor
2021-02-01
Mobile access and working towers made of prefabricated elements - Part
1: Materials, dimensions, design loads, safety and performance
requirements; German version EN 1004-1:2020
DIN
DIN EN ISO 13299 Beiblatt 1:2016-03
En Vigor
2016-03-01
Sensory analysis - Investigation of profiles - Examples for the
statistical evaluation
DIN
DIN EN ISO 18497-2:2025-04
En Vigor
2025-04-01
Agricultural machinery and tractors - Safety of partially automated,
semi-autonomous and autonomous machinery - Part 2: Design principles for
obstacle protection systems (ISO 18497-2:2024); German version EN ISO 18497-2:2024
DIN
DIN EN ISO 5014:2026-03
En Vigor
2026-03-01
Dense and insulating shaped refractory products - Determination of
modulus of rupture at ambient temperature (ISO 5014:2025); German
version EN ISO 5014:2025
DIN
DIN EN ISO 23036-2:2021-08
En Vigor
2021-08-01
Microbiology of the food chain - Methods for the detection of Anisakidae
L3 larvae in fish and fishery products - Part 2: Artificial digestion
method (ISO 23036-2:2021); German version EN ISO 23036-2:2021
DIN
DIN EN ISO 21182:2026-04
En Vigor
2026-04-01
Light conveyor belts - Determination of the coefficient of friction (ISO
21182:2025); German version EN ISO 21182:2025
DIN
DIN EN 60317-33:2016-08
En Vigor
2016-08-01
Specifications for particular types of winding wires - Part 33: Glass
fibre wound, resin or varnish impregnated, bare or enamelled rectangular
copper wire, temperature index 200 (IEC 60317-33:2015); German version
EN 60317-33:2016 / Note: DIN EN 60317-33 (2006-09) remains valid
alongside this standard until 2018-11-26.*Applies in conjunction with
DIN EN 60317-0-4 (2016-05).
DIN
DIN EN 4660-004:2020-03
En Vigor
2020-03-01
Aerospace series - Modular and Open Avionics Architectures - Part 004:
Packaging; German and English version EN 4660-004:2019
DIN
DIN 30784 Beiblatt 1:1986-01
En Vigor
1986-01-01
Transportation chain; transportation chain for money and values; modular
coordination; technical linkage with other fields
DIN
DIN EN ISO 9809-3:2020-02
En Vigor
2020-02-01
Gas cylinders - Design, construction and testing of refillable seamless
steel gas cylinders and tubes - Part 3: Normalized steel cylinders and
tubes (ISO 9809-3:2019); German version EN ISO 9809-3:2019
DIN
DIN
DIN EN 60317-28:2014-10
En Vigor
2014-10-01
Specifications for particular types of winding wires - Part 28:
Polyesterimide enamelled rectangular copper wire, class 180 (IEC
60317-28:2013); German version EN 60317-28:2014 / Note: DIN EN 60317-28
(2008-04) remains valid alongside this standard until 2016-11-14.*To be
amended by DIN EN 60317-28/A1 (2025-09).
DIN
DIN EN 17887-2:2024-11
En Vigor
2024-11-01
Thermal performance of buildings - In situ testing of completed
buildings - Part 2: Steady-state data analysis for aggregate heat loss
test; German version EN 17887-2:2024
DIN
DIN EN ISO 18785-3:2021-03
En Vigor
2021-03-01
Friction stir spot welding - Aluminium - Part 3: Qualification of
welding personnel (ISO 18785-3:2018); German version EN ISO 18785-3:2021
DIN
DIN EN ISO 15614-2:2025-12
En Vigor
2025-12-01
Specification and qualification of welding procedures for metallic
materials - Welding procedure test - Part 2: Arc welding of aluminium
and its alloys (ISO 15614-2:2025); German version EN ISO 15614-2:2025
DIN
DIN EN 16476:2014-07
En Vigor
2014-07-01
Liquid petroleum products - Determination of Sodium, Potassium, Calcium,
Phosphorus, Copper and Zinc contents in diesel fuel - Method via
Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES);
German version EN 16476:2014
DIN
DIN EN ISO 19277:2019-03
En Vigor
2019-03-01
Petroleum, petrochemical and natural gas industries - Qualification
testing and acceptance criteria for protective coating systems under
insulation (ISO 19277:2018); English version EN ISO 19277:2018 / Note:
To be replaced by DIN EN ISO 19277-1 (2026-04).
DIN
DIN
DIN EN ISO 8130-16:2023-10
En Vigor
2023-10-01
Coating powders - Part 16: Determination of density by liquid
displacement in a measuring cylinder (ISO 8130-16:2022); German version
EN ISO 8130-16:2023
DIN
DIN EN 6059-502:2015-03
En Vigor
2015-03-01
Aerospace series - Electrical cables, installation - Protection sleeves
- Test methods - Part 502: Resistance to electrical arcs; German and
English version EN 6059-502:2014 / Note: Applies in conjunction with DIN
EN 6059-100 (2012-03).*To be replaced by DIN EN 6059-502 (2024-02), DIN
EN 6059-502 (2024-09), DIN EN 6059-502 (2025-06).
DIN
DIN EN IEC 62541-10:2026-05
En Vigor
2026-05-01
OPC Unified Architecture - Part 10: Programs (IEC 65E/1057/CDV:2024);
English version prEN IEC 62541-10:2024 / Note: Date of issue
2026-04-17*Intended as replacement for DIN EN IEC 62541-10 (2021-08).
DIN
DIN EN ISO 16828:2025-11
En Vigor
2025-11-01
Non-destructive testing - Ultrasonic testing - Time-of-flight
diffraction technique for detection and sizing of discontinuities (ISO
16828:2025); German version EN ISO 16828:2025
