145075 Resultados disponibles

Filtrar:

(110246)
(34829)
(0)
DIN

DIN 43637-5:1977-05

En Vigor
1977-05-01
Overhead line private connection boxes; disk for spacing of conductors in the roof pole stand tube
DIN

DIN EN 17899:2025-04

En Vigor
2025-04-01
Water quality - Spectrophotometric determination of chlorophyll-a content by ethanol extraction for the routine monitoring of water quality; German version EN 17899:2024
DIN

DIN 12383:1981-11

En Vigor
1981-11-01
Laboratory glassware; pear shape flasks
DIN

DIN 16511:1966-01

En Vigor
1966-01-01
Proofmarks
DIN

DIN EN 14068:2004-03

En Vigor
2004-03-01
Products and systems for the protection and repair of concrete structures - Test methods - Determination of watertightness of injected cracks without movement in concrete; German version of EN 14068:2003
DIN

DIN EN 61523-2:2003-06

En Vigor
2003-06-01
Delay and power calculation standards - Part 2: Pre-layout delay calculation specification for CMOS ASIC libraries (IEC 61523-2:2002); German version EN 61523-2:2002, text in English
DIN

DIN 931-2:2009-06

En Vigor
2009-06-01
Hexagon head bolts - Part 2: Metric thread M 68 to M 160 x 6 - Product grade B
DIN

DIN 8245:1972-10

En Vigor
1972-10-01
Slotted Countersunk (Flat) Head Screws for Fine Mechanics; M 0.4 to M 1.4
DIN

DIN ETS 300233:1994-10

En Vigor
1994-10-01
Integrated Services Digital Network (ISDN) - Access digital section for ISDN primary rate; English version ETS 300233:1994
DIN

DIN 48050-2:1963-01

En Vigor
1963-01-01
Insulator pin, cylindrical
DIN

DIN EN 62300:2005-06

En Vigor
2005-06-01
Consumer audio/video equipment digital interface with plastic optical fibre (IEC 62300:2004); German version EN 62300:2005
DIN

DIN EN 415-10:2014-07

En Vigor
2014-07-01
Safety of packaging machines - Part 10: General requirements; German version EN 415-10:2014 / Note: To be replaced by DIN EN ISO 24158-1 (2025-11).
DIN

DIN 9004:1985-06

En Vigor
1985-06-01
Aerospace; bending radii for tubes; approximate values for cold working
DIN

DIN 6357:1988-07

En Vigor
1988-07-01
Holding arbors with taper shank 7/24 for milling cutters and face milling cutters with internal alignment
DIN

DIN EN 12721:2014-02

En Vigor
2014-02-01
Furniture - Assessment of surface resistance to wet heat; German version EN 12721:2009+A1:2013
DIN

DIN 43119-2:1983-05

En Vigor
1983-05-01
Revolving bolts for contact wire clamp for overhead equipment; revolving bolts with thread
DIN

DIN 4126 Beiblatt 1:2013-09

En Vigor
2013-09-01
Stability analysis of diaphragm walls - Supplement 1: Explanations
DIN

DIN 71985-4:1982-08

En Vigor
1982-08-01
Nipples for cables for controls; nipples for swaging
DIN

DIN 81852:2026-02

En Vigor
2026-02-01
Stud link anchor chain cables, Grade K4 - End shackles; Text in German and English
DIN

DIN 13112-1:2017-11

En Vigor
2017-11-01
Medical instruments - Part 1: Scissors for preparations without carbide inserts
DIN

DIN 11853-1:2026-02

En Vigor
2026-02-01
Stainless steel components for hygienic applications in the food industry - Part 1: Connections
DIN

DIN 18503:2003-12

En Vigor
2003-12-01
Clinker bricks for paving - Requirements and test methods
DIN

DIN EN IEC 61784-1:2020-08

En Vigor
2020-08-01
Industrial communication networks - Profiles - Part 1: Fieldbus profiles (IEC 61784-1:2019); English version EN IEC 61784-1:2019, only on CD-ROM / Note: CD-ROM*DIN EN 61784-1 (2015-02) remains valid alongside this standard until 2022-05-15.*To be replaced by DIN EN IEC 61784-1-100 (2021-05).
DIN

DIN 85005-2:2017-05

En Vigor
2017-05-01
Ships and marine technology - Graphical symbols for technical documentation - Part 2: Piping and hose assemblies, pipe and hose joints, penetrations; Text in German and English
DIN

DIN 9676:1977-04

En Vigor
1977-04-01
Agricultural tractors; tow bar for three-point linkage
DIN

DIN 4051-100:2025-11

En Vigor
2025-11-01
Sewer clinker - Part 100: Proof of conformity for sewer clinker according to DIN 4051-1
DIN

DIN 5256:1997-12

En Vigor
1997-12-01
Pliers for retaining rings for bores
DIN

DIN EN 4727:2025-11

En Vigor
2025-11-01
Aerospace series - Standardized passenger seat weight information; German and English version EN 4727:2025 / Note: CD-ROM
DIN

DIN EN 60731:2023-05

En Vigor
2023-05-01
Medical electrical equipment - Dosimeters with ionization chambers as used in radiotherapy (IEC 60731:2011 + AMD 1:2016); German version EN 60731:2012 + A1:2022
DIN

DIN 16995:2016-04

En Vigor
2016-04-01
Films for packaging - Plastic films - Properties, testing
DIN

DIN EN 45556:2020-03

En Vigor
2020-03-01
General method for assessing the proportion of reused components in energy-related products; German version EN 45556:2019
DIN

DIN 53255:2017-08

En Vigor
2017-08-01
Testing of wood adhesives and glued wood joints - Mechanical delamination tests by grooving and chopping
DIN

DIN 4047-3:2002-03

En Vigor
2002-03-01
Water engineering of agricultural lands - Terms - Part 3: Soil science, soil taxonomy, soil investigation
DIN

DIN 75204-2:1992-05

En Vigor
1992-05-01
Road vehicles; traffic accident analysis; concepts associated with trace types and characteristics
DIN

DIN 65030:1997-01

En Vigor
1997-01-01
Aerospace - Solderless tube fittings with coupling sleeves, flaveless - Technical specification; inactive for new design
DIN

DIN EN 1759-4:2003-12

En Vigor
2003-12-01
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 4: Aluminium alloy flanges; German version EN 1759-4:2003 / Note: To be replaced by DIN EN 1759-4 (2022-01).
DIN

DIN 35911:2025-12

En Vigor
2025-12-01
Automatic electrical controls for installation in drinking water systems - Requirements for solenoid valves
DIN

DIN EN ISO 11737-2:2020-07

En Vigor
2020-07-01
Sterilization of health care products - Microbiological methods - Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process (ISO 11737-2:2019); German version EN ISO 11737-2:2020
DIN

DIN EN ISO 22476-10:2018-03

En Vigor
2018-03-01
Geotechnical investigation and testing - Field testing - Part 10: Weight sounding test (ISO 22476-10:2017); German version EN ISO 22476-10:2017
DIN

DIN 19596-2:2025-07

En Vigor
2025-07-01
Manhole tops without vents, classes A 15 and B 125, circular - Part 2: Frames
DIN

DIN EN IEC 62812 Berichtigung 1:2020-08

En Vigor
2020-08-01
Low resistance measurements - Methods and guidance (IEC 62812:2019/COR1:2020); German version EN IEC 62812:2019/AC:2020-04)
DIN

DIN 4899:1978-09

En Vigor
1978-09-01
Linear electric multiports
DIN

DIN 14679:2024-02

En Vigor
2024-02-01
Firefighting purposes - Chargers for float charge of starter batteries and auxiliary batteries for special uses - Requirements and testing
DIN

DIN EN 62343-1-2:2016-07

En Vigor
2016-07-01
Dynamic modules - Part 1-2: Performance standards - Tuneable chromatic dispersion compensator (non-connectorized) (IEC 62343-1-2:2015); German version EN 62343-1-2:2015 / Note: DIN EN 62343-1-2 (2009-02) remains valid alongside this standard until 2018-07-30.
DIN

DIN EN 16691:2015-12

En Vigor
2015-12-01
Water quality - Determination of selected polycyclic aromatic hydrocarbons (PAH) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography-mass spectrometry (GC-MS); German version EN 16691:2015
DIN

DIN 21615:2009-10

En Vigor
2009-10-01
Auxiliary ventilation for mining - Sheet steel reducers with flange and shoulder
DIN

DIN 49440-4:1989-12

En Vigor
1989-12-01
Two-pole socket-outlets with earthing rated for 10 A 250 V d.c., 16 A 250 V a.c.; gauges for portable socket-outlets
DIN

DIN EN ISO 8291:2022-11

En Vigor
2022-11-01
Vitreous and porcelain enamels - Method of test of self-cleaning properties (ISO 8291:1986); German version EN ISO 8291:2022
DIN

DIN EN ISO 11267:2023-12

En Vigor
2023-12-01
Soil quality - Inhibition of reproduction of Collembola (Folsomia candida) by soil contaminants (ISO 11267:2023); German version EN ISO 11267:2023
DIN

DIN 51353:2021-06

En Vigor
2021-06-01
Testing of insulating oils - Detection of corrosive sulfur - Silver strip test
DIN

DIN EN ISO 18113-2:2024-10

En Vigor
2024-10-01
In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 2: In vitro diagnostic reagents for professional use (ISO 18113-2:2022); German version EN ISO 18113-2:2024
DIN

DIN 7892:2023-12

En Vigor
2023-12-01
Gymnastic and playing field equipment - Electrically operated lifting devices - Functional and safety requirements and testing / Note: DIN 7892 (2017-11) remains valid alongside this standard until 2024-05-31.
DIN

DIN EN 301933-1:2003-07

En Vigor
2003-07-01
Intelligent Network (IN) - Intelligent Network Capability Set 3 (CS3); Intelligent Network Application Protocol (INAP); Test Suite Structure and Test Purposes (TSS&TP) specification for Service Switching Function (SSF) - Part 1: Basic capability set of CS3 (Endorsement of the English version EN 301933-1 V 1.1.1 (2003-01) as German Standard) / Note: DIN ETS standards collection*Endorsement notice
DIN

DIN 50450-9:2021-07

En Vigor
2021-07-01
Testing of materials for semiconductor technology - Determination of impurities in carrier gases and dopant gases - Part 9: Determination of oxygen, nitrogen, carbonmonoxide, carbondioxide, hydrogen and C<(Index)1>-C<(Index)3>-hydrocarbons in gaseous hydrogen chloride by gaschromatography
DIN

DIN EN ISO 8654:2020-05

En Vigor
2020-05-01
Jewellery - Colours of gold alloys - Definition, range of colours and designation (ISO 8654:2018 + Amd 1:2019); German version EN ISO 8654:2018 + A1:2019
DIN

DIN EN 2448:2009-07

En Vigor
2009-07-01
DIN

DIN EN ISO/IEC 2382-37:2025-02

En Vigor
2025-02-01
Information technology - Vocabulary - Part 37: Biometrics (ISO/IEC 2382-37:2022); Trilingual version EN ISO/IEC 2382-37:2023
DIN

DIN EN ISO 25119-2:2024-07

En Vigor
2024-07-01
Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 2: Concept phase (ISO 25119-2:2019); German version EN ISO 25119-2:2023
DIN

DIN CEN/TS 15291:2006-04

En Vigor
2006-04-01
Identification card system - Guidance on design for accessible card-activated devices; German version CEN/TS 15291:2006
DIN

DIN EN ISO 28199-2:2021-09

En Vigor
2021-09-01
Paints and varnishes - Evaluation of properties of coating systems related to the spray application process - Part 2: Colour stability, process hiding power, re-dissolving, overspray absorption, wetting, surface texture and mottling (ISO 28199-2:2021); German version EN ISO 28199-2:2021