Filtrar:
DIN
DIN EN 300097-5:1999-12
En Vigor
1999-12-01
Integrated Services Digital Network (ISDN); Connected Line
Identification Presentation (COLP) supplementary service - Digital
Subscriber Signalling System No. one (DSS1) protocol - Part 5: Test
Suite Structure and Test Purposes (TSS&TP) specification for the
network (Endorsement of the English version EN 300097-5 V 1.2.4
(1998-06) as German standard) / Note: Endorsement notice
DIN
DIN EN 15073:2013-08
En Vigor
2013-08-01
Chemicals used for treatment of swimming pool water - Sodium
dichloroisocyanurate, dihydrate; German version EN 15073:2013 / Note: To
be replaced by DIN EN 15073 (2020-07).
DIN
DIN EN 12982:2009-11
En Vigor
2009-11-01
Industrial valves - End-to-end and centre-to-end dimensions for butt
welding end valves; German version EN 12982:2009
DIN
DIN EN 1119:2009-07
En Vigor
2009-07-01
Plastics piping systems - Joints for glass-reinforced thermosetting
plastics (GRP) pipes and fittings - Test methods for leaktightness and
resistance to damage of non-thrust resistant flexible joints with
elastomeric sealing elements; German version EN 1119:2009
DIN
DIN
DIN EN 61094-4:1996-05
En Vigor
1996-05-01
Measurement microphones - Part 4: Specifications for working standard
microphones (IEC 61094-4:1995); German version EN 61094-4:1995
DIN
DIN EN 61076-3-001:2009-07
En Vigor
2009-07-01
Connectors for electronic equipment - Product requirements - Part 3-001:
Rectangular connectors - Blank detail specification (IEC
61076-3-001:2008); German version EN 61076-3-001:2008 / Note: DIN EN
61076-3-001 (2000-10) remains valid alongside this standard until 2011-10-01.
DIN
DIN EN 12848:2009-07
En Vigor
2009-07-01
Bitumen and bituminous binders - Determination of mixing stability with
cement of bituminous emulsions; German version EN 12848:2009
DIN
DIN EN ISO 18757:2006-01
En Vigor
2006-01-01
Fine ceramics (advanced ceramics, advanced technical ceramics) -
Determination of specific surface area of ceramic powders by gas
adsorption using the BET method (ISO 18757:2003); German version EN ISO 18757:2005
DIN
DIN EN 15737:2009-12
En Vigor
2009-12-01
Timber structures - Test methods - Torsional resistance of driving in
screws; German version EN 15737:2009
DIN
DIN EN 15483:2009-02
En Vigor
2009-02-01
Ambient air quality - Atmospheric measurements near ground with FTIR
spectroscopy; German version EN 15483:2008
DIN
DIN EN 61290-5-1:2007-03
En Vigor
2007-03-01
Optical amplifiers - Test methods - Part 5-1: Reflectance parameters -
Optical spectrum analyzer method (IEC 61290-5-1:2006); German version EN
61290-5-1:2006 / Note: DIN EN 61290-5-1 (2001-06) remains valid
alongside this standard until 2009-06-01.
DIN
DIN EN 15782:2009-11
En Vigor
2009-11-01
Animal feeding stuffs - Determination of nicarbazin - High-performance
liquid chromatographic method; German version EN 15782:2009
DIN
DIN EN 2997-003:2012-08
En Vigor
2012-08-01
Aerospace series - Connectors, electrical, circular, coupled by threaded
ring, fire-resistant or non fire-resistant, operating temperatures -65
°C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 003:
Square flange receptacle - Product standard; German and English version
EN 2997-003:2012
DIN
DIN EN 539-2:2013-08
En Vigor
2013-08-01
Clay roofing tiles for discontinuous laying - Determination of physical
characteristics - Part 2: Test for frost resistance; German version EN 539-2:2013
DIN
DIN EN 16196:2013-01
En Vigor
2013-01-01
Fertilizers - Manganimetric determination of extracted calcium following
precipitation in the form of oxalate; German version EN 16196:2012
DIN
DIN
DIN EN 869:2009-12
En Vigor
2009-12-01
Safety of machinery - Safety requirements for pressure metal diecasting
units; German version EN 869:2006+A1:2009 / Note: DIN EN 869 (2007-02)
remains valid alongside this standard until 2009-12-28.*To be replaced
by DIN EN ISO 23063 (2020-04).
DIN
DIN EN 22341 Berichtigung 1:2007-05
En Vigor
2007-05-01
Clevis pins with head (ISO 2341:1986); German version EN 22341:1992,
Corrigenda to DIN EN 22341:1992-10
DIN
DIN EN 15436-4:2010-01
En Vigor
2010-01-01
Road service area maintenance equipment - Part 4: Delivery acceptance of
the machines by the users; German version EN 15436-4:2009
DIN
DIN EN 14761:2008-09
En Vigor
2008-09-01
Wood flooring - Solid wood parquet - Vertical finger, wide finger and
module brick; German version EN 14761:2006+A1:2008
DIN
DIN EN 3142:1996-04
En Vigor
1996-04-01
Aerospace series - Rivets, solid, universal head, in heat resisting
nickel base alloy NI-P11, inch based series; German version EN 3142:1996
DIN
DIN EN 300097-4:1999-12
En Vigor
1999-12-01
Integrated Services Digital Network (ISDN); Connected Line
Identification Presentation (COLP) supplementary service - Digital
Subscriber Signalling System No. one (DSS1) protocol - Part 4: Abstract
Test Suite (ATS) and partial Protocol Implementation eXtra Information
for Testing (PIXIT) proforma specification for the user (Endorsement of
the English version EN 300097-4 V 1.2.4 (1998-06) as German standard) /
Note: Endorsement notice
DIN
DIN EN 12915-2:2009-07
En Vigor
2009-07-01
Products used for the treatment of water intended for human consumption
- Granular activated carbon - Part 2: Reactivated granular activated
carbon; German version EN 12915-2:2009
DIN
DIN EN 3327:2008-12
En Vigor
2008-12-01
Aerospace series - Bolts, double hexagon head, close tolerance, medium
thread length, in heat resisting nickel base alloy NI-P100HT (Inconel
718), uncoated - Classification: 1275 MPa/650 °C; German and English
version EN 3327:2008 / Note: To be replaced by DIN EN 3327 (2025-07).
DIN
DIN EN 13068-3:2001-12
En Vigor
2001-12-01
Non-destructive testing - Radioscopic testing - Part 3: General
principles for the radioscopic testing of metallic materials by X- and
gamma rays; German version EN 13068-3:2001
DIN
DIN EN 13364:2002-03
En Vigor
2002-03-01
Natural stone test methods - Determination of the breaking load at dowel
hole; German version EN 13364:2001 / Note: To be replaced by DIN EN
13364 (2024-12), DIN EN 13364-1 (2026-05), DIN EN 13364-2 (2026-04).
DIN
DIN EN 302623:2009-05
En Vigor
2009-05-01
Broadband Wireless Access Systems (BWA) in the 3400 MHz to 3800 MHz
frequency band - Mobile Terminal Stations - Harmonized EN covering the
essential requirements of article 3.2 of the R&TTE Directive
(Endorsement of the English version EN 302623 V1.1.1 (2009-01) as German
standard) / Note: DIN ETS standards collection*Endorsement notice
DIN
DIN EN ISO 22827-1:2006-02
En Vigor
2006-02-01
Acceptance tests for Nd:YAG laser beam welding machines - Machines with
optical fibre delivery - Part 1: Laser assembly (ISO 22827-1:2005);
German version EN ISO 22827-1:2005
DIN
DIN EN 313-1:1996-05
En Vigor
1996-05-01
Plywood - Classification and terminology - Part 1: Classification;
German version EN 313-1:1996
DIN
DIN EN 12838:2000-07
En Vigor
2000-07-01
Installations and equipment for liquefied natural gas - Suitability
testing of LNG sampling systems; German version EN 12838:2000
DIN
DIN EN ISO 15310:2005-10
En Vigor
2005-10-01
Fibre-reinforced plastic composites - Determination of the in-plane
shear modulus by the plate twist method (ISO 15310:1999); German version
EN ISO 15310:2005
DIN
DIN EN ISO 17693:2005-12
En Vigor
2005-12-01
Footwear - Test methods for uppers - Resistance to damage on lasting
(ISO 17693:2004); German version EN ISO 17693:2005
DIN
DIN EN 300097-3:1999-12
En Vigor
1999-12-01
Integrated Services Digital Network (ISDN); Connected Line
Identification Presentation (COLP) supplementary service - Digital
Subscriber Signalling System No. one (DSS1) protocol - Part 3: Test
Suite Structure and Test Purposes (TSS&TP) specification for the
user (Endorsement of the English version EN 300097-3 V 1.2.4 (1998-06)
as German Standard) / Note: Endorsement notice
DIN
DIN EN 1944:1996-04
En Vigor
1996-04-01
Self adhesive tapes - Measurement of unwind adhesion at low speed;
German version EN 1944:1996
DIN
DIN EN ISO 15083/A11:2023-07
En Vigor
2023-07-01
Small craft - Bilge-pumping systems (ISO 15083:2020); German version EN
ISO 15083:2020/A11:2023
DIN
DIN EN 12907:2009-07
En Vigor
2009-07-01
Products used for treatment of water intended for human consumption -
Pyrolyzed coal material; German version EN 12907: 2009
DIN
DIN EN 12714:2009-10
En Vigor
2009-10-01
Plastics drums - Removable head (open head) drums with a nominal
capacity of 25 l to 60 l; German version EN 12714:2009
DIN
DIN EN 301846:2001-12
En Vigor
2001-12-01
Private Integrated Services Network (PISN) - Profile Standard for the
Use of PSS1 (QSIG) in Air Traffic Services Networks (Endorsement of the
English version EN 301846 V 1.1.1 (2001-07) as German Standard) / Note:
DIN ETS standards collection*Endorsement notice
DIN
DIN EN 61754-28:2013-04
En Vigor
2013-04-01
Fibre optic interconnecting devices and passive components - Fibre optic
connector interfaces - Part 28: Type LF3 connector family (IEC
61754-28:2012); German version EN 61754-28:2012
DIN
DIN EN 942:2007-06
En Vigor
2007-06-01
Timber in joinery - General requirements; German version EN 942:2007
DIN
DIN EN ISO 483:2006-02
En Vigor
2006-02-01
Plastics - Small enclosures for conditioning and testing using aqueous
solutions to maintain the humidity at a constant value (ISO 483:2005);
German version EN ISO 483:2005
DIN
DIN EN ISO 21469:2006-05
En Vigor
2006-05-01
Safety of machinery - Lubricants with incidental product contact -
Hygiene requirements (ISO 21469:2006); German version EN ISO 21469:2006
DIN
DIN EN 14647 Berichtigung 1:2007-04
En Vigor
2007-04-01
Calcium aluminate cement - Composition, specifications and conformity
criteria; German version EN 14647:2005, Corrigenda to DIN EN
14647:2006-01; German version EN 14647:2005/AC:2006
DIN
DIN EN 12270:2014-03
En Vigor
2014-03-01
Mountaineering equipment - Chocks - Safety requirements and test
methods; German version EN 12270:2013
DIN
DIN EN 300392-10-16:2007-04
En Vigor
2007-04-01
Terrestrial Trunked Radio (TETRA) - Voice plus Data (V+D) - Part 10:
Supplementary services stage 1 - Sub-part 16: Pre-emptive Priority Call
(PPC) (Endorsement of the English version EN 300392-10-16 V1.3.1
(2006-08) as German standard) / Note: DIN ETS standards
collection*Endorsement notice
DIN
DIN EN 486:2009-11
En Vigor
2009-11-01
Aluminium and aluminium alloys - Extrusion ingots - Specifications;
German version EN 486:2009
DIN
DIN EN 300061-2:1999-12
En Vigor
1999-12-01
Integrated Services Digital Network (ISDN); Subadressing (SUB)
supplementary service - Digital Subscriber Signalling System No. one
(DSS1) protocol - Part 2: Protocol Implementation Conformance Statement
(PICS) proforma specification (Endorsement of the English version EN
300061-2 V 1.2.4 (1998-06) as German standard) / Note: Endorsement notice
DIN
DIN EN 50446:2007-04
En Vigor
2007-04-01
Straight thermocouple assembly with metal or ceramic protection tube and
accessories; German version EN 50446:2006 / Note: DIN 43729 (1978-12),
DIN 43733 (1986-03), DIN 43734 (1986-03), DIN EN 50112 (1995-08) and DIN
EN 50113 (1995-08) remain valid alongside this standard until 2009-09-01.
DIN
DIN EN 61237-2:1996-04
En Vigor
1996-04-01
Methods of measurement for broadcast video tape recorders - Part 2:
Electrical measurements of analogue composite video signals (IEC
61237-2:1995); German version EN 61237-2:1995
DIN
DIN EN 61303:1996-03
En Vigor
1996-03-01
Medical electrical equipment - Radionuclide calibrators - Particular
methods for describing performance (IEC 61303:1994); German version EN 61303:1995
DIN
DIN EN 300462-6-2:2001-12
En Vigor
2001-12-01
Transmission and Multiplexing (TM) - Generic requirements for
synchronization networks - Part 6-2: Timing characteristics of primary
reference clocks; Implementation Conformance Statement (ICS) proforma
specification (Endorsement of the English version EN 300462-6-2 V 1.1.1
(2000-03) as German Standard) / Note: DIN ETS standards
collection*Endorsement notice
DIN
DIN EN 62639:2013-02
En Vigor
2013-02-01
Fluorescent induction lamps - Performance specification (IEC
62639:2012); German version EN 62639:2012
DIN
DIN EN 12875-2:2002-03
En Vigor
2002-03-01
Mechanical dishwashing resistance of utensils - Part 2: Inspection of
non-metallic articles; German version EN 12875-2:2001 / Note: To be
replaced by DIN EN 12875-2 (2024-12), DIN EN 12875-2 (2026-05).
DIN
DIN EN 62137-1-3:2009-07
En Vigor
2009-07-01
Surface mounting technology - Environmental and endurance test methods
for surface mount solder joint - Part 1-3: Cyclic drop test (IEC
62137-1-3:2008); German version EN 62137-1-3:2009
DIN
DIN EN 1093-7:2008-11
En Vigor
2008-11-01
Safety of machinery - Evaluation of the emission of airborne hazardous
substances - Part 7: Separation efficiency by mass, ducted outlet;
German version EN 1093-7:1998+A1:2008 / Note: DIN EN 1093-7 (1998-11)
remains valid alongside this standard until 2009-12-28.
DIN
DIN EN 2934:1996-05
En Vigor
1996-05-01
Aerospace series - Bolts, T-head, relieved shank, long thread, in heat
resisting nickel base alloy NI-P100HT (Inconel 718), silver plated -
Classification: 1275 MPa (at ambient temperature)/650 °C; German version
EN 2934:1996
DIN
DIN EN ISO 463:2006-06
En Vigor
2006-06-01
Geometrical Product Specifications (GPS) - Dimensional measuring
equipment - Design and metrological characteristics of mechanical dial
gauges (ISO 463:2006); German version EN ISO 463:2006 / Note: To be
replaced by DIN EN ISO 463 (2026-01).
DIN
DIN EN 300064-5:1999-12
En Vigor
1999-12-01
Integrated Services Digital Network (ISDN); Direct Dialling In (DDI)
supplementary service - Digital Subscriber Signalling System No. one
(DSS1) protocol - Part 5: Test Suite Structure and Test Purposes
(TSS&TP) specification for the network (Endorsement of the English
version EN 300064-5 V 1.3.4 (1998-06) as German standard) / Note:
Endorsement notice
DIN
DIN EN 12770:2000-03
En Vigor
2000-03-01
Footwear - Test methods for outsoles - Abrasion resistance; German
version EN 12770:1999 / Note: To be replaced by DIN EN ISO 20871 (2016-01).
